Power Inverter with Solar Controller

6000W 48V Pure Sine Wave Solar Inverter Charger

  No Tax     Free Shipping     12 Months Warranty     

Shipped By:  

We Accept:    

Hightlight:

  • ★ LF-PV Series Pure Sine Wave Inverter is a combination of an inverter, AC charger, Mppt solar charger and Auto-transfer switch into one complete system.
  • ★ AC/Battery Priority: Our inverter is designed with AC priority by default, you can choose the battery priority by SW5 switch.
  • ★ Features: Smart Remote Control, Automatic Generator Starting (AGS), Support Solar Panel with MPPT Function, Suitable for different kinds of batteries.
  • ★ Application: for all the kinds of load: refrigerators, freezers, microwaves, dryers, air conditioners, pumps and all the big home and business applications.

QUESTIONS & ANSWERS

Have a Question?

Be the first to ask a question about this.

Ask a Question

Features

You can disable the inbuilt solar controller, connect with external solar controller, or use for other systems (it is not limited for solar system)

Main Features:

  • 6KW Pure Sine Wave Power Inverter Charger DC 48V AC 120V
  • Auto Generator Start (AGS)
  • Support Solar Panel with MPPT Function
  • Include Battery Temperature Sensor (BTS) and Remote Control
  • 8 kinds of battery voltage selection ( lithium LiFePO4, gel, AGM and lead Acid batteries)
  • Compatible With All kind of Home & Office Appliances
  • Powerful Charge Rate Up to 120Amp, Selectable From 0%-100%
  • Built-in transfer switch and battery charge, backup or off grid power solutions
  • AC/Battery Priority Mode, Designates the Inverter-Preferred UPS Configuration
  • 4-step Intelligent Battery Charging, PFC (Power Factor Correction) for Charger
  • 8 ms Typical Transfer Time Between Utility & Battery,Ensure Power Continuity
  • 15s Delay Before Transfer when AC Recover, Protection for Load when Used with Generator

Packaging:

  • 6KW 48V Pure Sine Wave Solar Power Inverter
  • English Manual
  • Remote Control
  • BTS Cable
  • Unit Weight: 107.8 LB 
  • Unit Size: 19.21 x 16.34 x 7.87 inch

6000W 48V AC Input 240V Split Phase Pure Sine Wave Power Solar Inverter

Specification

Main Specification:

  • Continuous Output Power: 6.0KW
  • Surge Rating(20s): 18.0KW
  • Output Waveform: Pure Sine Wave
  • AC Output Voltage: 120V 
  • AC Input Voltage: 120V ( not suitable for AC 240V input )
  • DC Battery Voltage: 48Vdc
  • Solar charger Current: 60Amp
  • AC Battery charger: 50±5Amp
  • Output Frequency: 50Hz /60Hz
  • Typical transfer Time: 10ms(Max)

DC Input:

  • Nominal Input Voltage: 48.0Vdc
  • Minimum Start Voltage: 40.0Vdc/ 42.0Vdc
  • Low Battery Alarm: 42.0Vdc / 44.0Vdc
  • Low Battery Trip: 40.0Vdc / 42.0Vdc
  • High Voltage Alarm: 64.0Vdc
  • Low Battery voltage recover: 62.0Vdc
  • Power Saver on Idle Consumption: 25W
  • Power Saver off Idle Power: 90W

Charger :

  • Output Voltage: Depends on battery type
  • Battery Initial Voltage for Start Up: 40-62.8V
  • Over Charge Protection Shutdown: 62.8V
  • Charger Breaker: 40A
  • Input Voltage Waveform: Sine wave (Grid or Generator)
  • AC input range:100-135Vac/90-135Vac
  • Nominal Input Frequency :50Hz or 60Hz (Auto detect)

Solar Charger controller:  (you can disable our solar controller, and connect with external solar controller)

  • Solar Input Voltage Range: 60-145Vdc
  • Max.PV Open Circuit Array Voltage: 145Vdc
  • Rated Charge Current: 60A
  • Over Charge Disconnection: 59.2V
  • Over Charge Recovery: 54.4V
  • Over Discharge Disconnection: 43.2V(default)
  • Over Discharge Reconnection: 49.2V
    User Manual


    Download LF-PV Series Pure Sine Wave Inverter User's Manual

    FAQ

    Frequently Questions Answer

     1. Does this unit work with lithium batteries? Is there an adjustable curve for charge discharge voltages?

        Dear Customer, it's ok to work with lithium battery, LiFePO4 in types is for lithium battery, in addition, we are sorry to advise the charge and discharge voltage can't be adjusted, hope your kind understanding, thanks.

     


     

    Sungoldpower 6000W 48V   inverter is built for the purpose of running the whole house(small home), business office or large RV, which is perfect for using with renewable solar and using as an off-grid home and business back up power supply. The single phase inverter require 120V AC input and provide 120VAC output power for the appliances.

    This inverter charger is built with UPS function to provide uninterrupted power to run household electric devices. The solar inverter comes with an internal transfer switch, so you don’t have to do anything when the power goes out. All the devices you have selected will be connected to the back-up power source automatically. In fact, you will not even notice that the power cut happened.

    ★ It is built-in 50 amp battery charger uses AC power, from the grid or from a generator, to recharge different kinds of battery bank.
    ★ Built-in solar controller, Maximum solar input voltage 145V, Maximum solar input current 60A, can also connect with external controller.
    ★ Low Frequency Inverter, High Quality, your best choice for your 48V home system.

     It is perfect for off grid system or use AC power supply for home power emergencies, which can keep the power supply uninterrupted in the event of power failure. It can detect the loss of power and switch over to get power form a connected battery bank seamlessly to keep the power supply constant. Another popular application of this inverter is for RV and vehicle upfitting applications, such as powering lights and other appliances in an off-grid cabin. It also can provide electricity for a mobile business or mobile office, and running camping equipment. it is the best choice for your big power system.

    This full sine wave power inverter was designed with top quality and durability in mind and is built to survive 10+ years in the harshest conditions. Our full sine wave 6KW inverter works with very little power loss, outputs an average THD of 3%. Its built-in battery charger can use AC power from the grid or from a generator, to recharge different kinds of battery bank. 

    The AC/battery priority switch is SW5. In AC priority mode, when utility AC power cuts off, the transfer relay is de-energized and the load is automatically transferred to the inverter output. Once the AC utility is restored, the relay is energized and the load is automatically transferred to AC utility. For solar systems, it is better to choose battery priority.

    This power inverter has the direct-connect terminal block, which allows users to surpass the 6,000 watt capacity and harness its 300% surge power (up to 18,000 watts for 20 seconds as previously noted). It can effective power your electronic devices, household appliance and power tools, especially the tools and appliances with startup surges, such as refrigerator, freezer, microwave.

    The Low Frequency Off Grid Solar Inverter is a multi-function inverter, combining functions of inverter, solar charger controller and battery charger to offer uninterruptible power support. The solar controller is Max 60A and 145V Input. You can disable the inbuilt solar controller, and connect to a larger external solar controller, or use for other systems (it is not limited for solar system).

    The 6000w 48v inverter charger is a reliable power source for continuous backup applications. In inverter mode, DC power from the battery can be converted to AC power to power home appliances when a blackout in utility grid or when driving in mobile applications. It can also be a battery charger, which can convert the input AC power into DC power to charge the battery.