Main Features:
*12KW/ 15KW/ 18KW split phase pure sine inverter charger DC 48V AC 240V input AC output 120V/240V
*Auto Generator Start (AGS)
*Include Battery Temperature Sensor (BTS) and Remote Control
*8 kinds of battery voltage selection ( lithium LiFePO4, gel, AGM and lead Acid batteries)
*Compatible With All kind of Home & Office Appliances
*Powerful Charge Rate Up to 120Amp, Selectable From 0%-100%
*Built-in transfer switch and battery charge, backup or off grid power solutions
*AC/Battery Priority Mode, Designates the Inverter-Preferred UPS Configuration
*4-step Intelligent Battery Charging, PFC (Power Factor Correction) for Charger
*8 ms Typical Transfer Time Between Utility & Battery, Ensure Power Continuity
*15s Delay Before Transfer when AC Recover, Protection for Load when Used with Generator
Main Specification:
Continuous Output Power: 12.0KW/ 15.0KW/ 18.0KW
Surge Rating(20s): 300%
Output Waveform: Pure Sine Wave
AC Output Voltage: 120V and 240V
AC Input Voltage: 240V ( not suitable for AC 120V input )
DC Battery Voltage: 48Vdc
AC Battery charger: 115±5Amp(12KW inverter), 100±5Amp(15KW inverter), 95±5Amp(18KW inverter)
Output Frequency: 50Hz /60Hz
Typical transfer Time: 10ms(Max)
DC Input:
Nominal Input Voltage: 48.0Vdc
Minimum Start Voltage: 40.0Vdc/ 42.0Vdc
Low Battery Alarm: 42.0Vdc / 44.0Vdc
Low Battery Trip: 40.0Vdc / 42.0Vdc
High Voltage Alarm: 64.0Vdc
Low Battery voltage recover: 62.0Vdc
Power Saver on Idle Consumption: 40W(12KW inverter), 45W(15KW inverter), 50W(18KW inverter)
Power Saver off Idle Power: 180W(12KW inverter), 225W(15KW inverter), 270W(18KW inverter)
Charger :
Output Voltage: Depends on battery type
Battery Initial Voltage for Start Up: 40-62.8V
Over Charge Protection Shutdown: 62.8V
Charger Breaker: 80A(12KW inverter), 100A(15KW/18KW inverter)
Input Voltage Waveform: Sine wave (Grid or Generator)
AC input range:184-253Vac/140-270Vac
Nominal Input Frequency :50Hz or 60Hz (Auto detect)
Packaging:
*48V Split Phase Pure Sine Wave Power Inverter
*English Manual
*Remote Control
*BTS Cable
Frequently Questions Answer
1. How do you connect this to a home with the multiple phase system?
Dear Customer, it only has dual phase output, 120V and 240V, it can't work with the multiple phase system, thanks.
2. Does this unit work with lithium batteries? Is there an adjustable curve for charge discharge voltages?
Dear Customer, it's ok to work with lithium battery, LiFePO4 in types is for lithium battery, in addition, we are sorry to advise the charge and discharge voltage can't be adjusted, hope your kind understanding, thanks.